UEE40411 Certificate IV in Electrical-Instrumentation

(Nationally recognised Training)

Course Fees - $5870

UEE40411 Certificate IV in Electrical Instrumentation course Entry Requirements

  • Entry to this instrumentation training course requires a Cert III in Electro technology (UEE30811). Only Electricians with Valid Electrical License can enrol for this Instrumentation qualification. This instrumentation course requires certain physical competencies that a wheelchair user or someone with significant physical disabilities simply may not be able to fulfill so please check with admin before enrolment.
  • Students must attach a copy of their transcript, Driver’s License, Electrical License, resume and two references during enrolment so the admin staff can verify before admission to the course. Instrumentation apprenticeships are available. Please inquire with admin before enrolling into this industrial instrumentation training
  • Students with relevant Instrumentation experience are eligible for RPL for the units to be delivered.
  • The course duration will vary with experience and successful result of RPL. Online instrumentation courses are available and will accordingly influence the duration
  • Electricians should have completed the below units as a part of Cert III in Electro Technology (UEE30811) to attain credit transfer and entry to this course. If a student hasn’t completed the below units (do not meet the credit transfer requirements) then they will not be eligible for this course. A list of RTOs who deliver the units marked “CT” can be found on training.gov.au
  • This Electrical instrumentation course focuses particularly on the following units
UEENEEE038B Participate in development and follow a personal competency development plan TBD
UEENEEE117A Implement and monitor energy sector OHS policies and procedures TBD
UEENEEE124A Compile and produce an energy sector detailed report TBD
UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work CT
UEENEEG006A Solve problems in single and three phase low voltage machines CT
UEENEEG033A Solve problems in single and three phase low voltage electrical apparatus and circuits CT
UEENEEG063A Arrange circuits, control and protection for general electrical installations CT
UEENEEG101A Solve problems in electromagnetic devices and related circuits CT
UEENEEG102A Solve problems in low voltage a.c. circuits CT
UEENEEG103A Install low voltage wiring and accessories CT
UEENEEG104A Install appliances, switchgear and associated accessories for low voltage electrical installations CT
UEENEEG105A Verify compliance and functionality of low voltage general electrical installations CT
UEENEEG106A Terminate cables, cords and accessories for low voltage circuits CT
UEENEEG107A Select wiring systems and cables for low voltage general electrical installations CT
UEENEEG108A Trouble-shoot and repair faults in low voltage electrical apparatus and circuits CT
UEENEEG109A Develop and connect electrical control circuits CT
UEENEEI101A Use instrumentation drawings, specification, standards and equipment manuals TBD
UEENEEI102A Solve problems in pressure measurement components and systems TBD
UEENEEI103A Solve problems in density/level measurement components and systems TBD
UEENEEI104A Solve problems in flow measurement components and systems TBD
UEENEEI105A Solve problems in temperature measurement components and systems TBD
UEENEEK145A Implement and monitor energy sector environmental and sustainable policies and procedures TBD
UEENEEI150A Develop, enter and verity discrete control programs for programmable controllers TBD
UEENEEI151A Develop, enter and verify word and analogue control programs for programmable logic congrollers TBD

Instrumentation Jobs or instrument technician jobs

Job roles associated with this qualification relate to instrumentation, manufacturing and process control. Possible job titles and roles relevant to this qualification include:

  • Instrument fitter
  • instrument technician
  • Plant Instrument technician
  • E&I technician
  • I&E Technician
  • Instrument technician
  • Plant operator
  • Process Technician
  • Maintenance Technician

Duration

UEE40411 Certificate IV in Electrical Instrumentation – Students have maximum of 1 year to complete this instrumentation course from the date of enrolment. The assessments must be completed in class under the supervision of the trainer. The course has a RPL component and fieldwork component which depends on the student’s experience and exposure to type of work related to the competency. Regardless of the amount of Instrumentation experience students must complete an Instrument technician challenge test to be granted an RPL for that particular unit. Proof of Instrumentation experience should be provided and will be reference checked by the Trainer. Refer to the customised Instrumentation RPL kit provided by your trainer for further information. Further extension may be granted by the trainer on request. Some students or Instrumentation apprentices may require longer timeframes if they do not have experience or exposure with instrument technician work. Students are welcome to sit in the forthcoming classes at no additional fees to seek further assistance from the trainer to finish the remainder of Practical Assessment and course work. For the schedule of forthcoming classes speak to the trainer.

Delivery of competencies

The units are delivered via face to face delivery mode. The core units and the elective units are arranged in topics and are completed throughout the online and face to face delivery and via the learner’s self-paced completion of project assessment work.

The course is organized into the following themes

  • Instrumentation Theory lectures
  • Electrical Instrumentation Assessments
  • Internet research
  • Observation
  • Face to face
  • Instrumentation and Control Practical tasks
  • Group work
  • Activities in simulated work environment (as per Training Package Requirements)

Each student’s achievement of each Instrumentation unit of competency within the qualification is assessed by their completion of written, practical tests, assignments and the observation of the competency in practical projects, in varying contexts on a number of occasions.

Clients

Clients enrolling in this course are typically those electricians who desire to up skill and learn more about instrumentation which is a natural progression to the electrical trade.

Recognition of Prior Learning

RPL Fees – $495/unit (non-refundable). The competencies in this qualification may be attained through the process of Recognition of Prior Learning (RPL). Instrumentation RPL takes into consideration the candidates’ previous Instrumentation training, work and life experience. AUSINET trainer/assessor will provide candidates with a RPL Application Form at enrolment, to assist the candidate in determining if RPL is an appropriate pathway to gain the qualification. If appropriate, candidates will be provided with a RPL Self-Assessment Guide and instructions on how to prepare an Instrumentation portfolio of evidence. The RPL documentation is available on request.

RPL also includes an open book challenge test which has to be completed at Ausinet premises under the supervision of a trainer. A booking with Ausinet admin is essential to organise this test.

Course Fees, Payments and Refunds

  • Please refer to the Instrumentation course flyer for information on course fees, including any required deposit; administration fees; materials fees and any other charges (if applicable).
  • A non-refundable deposit is required to be paid, prior to Instrumentation course commencement, to confirm a place into a course, unless other arrangements have been made with the RTO. The deposit is outlined on the Instrumentation course flyer.
  • Instrumentation Certificates and Statements of Attainment are issued to students who are assessed as competent in the units completed. The cost of the certificates is included in the Instrumentation course fees.
  • Deposits are non-refundable (deposits are outlined on each Instrumentation course flyer) but can be transferred to another course.
  • Refunds may be made in the following circumstances:

 

    • Participants enrolled in training that has been cancelled by the RTO
    • Participant advice in writing to the RTO 7 days prior to course commencement that they are withdrawing from the course.

 

      • The following percentage of refund will apply to all training cancellations:
      • Where 20% or less of the Instrumentation course has been provided to the student 80% refund less $200.00 admin fee will apply.
      • Where less than 50% of the Instrumentation course has been provided to the student a 50% refund less $200.00 admin fee will apply.
      • Where 50% or more of the Instrumentation course has been provided to the student no refund will apply.
    • If the participant withdraws from a Instrumentation course or program due to illness or extreme hardship as determined by the RTO
  • Students are responsible for the safe storage of their Certificates and Statements of Attainment. If a student requires a reissue of their Certificate or Statement of Attainment, a certificate re-issue fee of $80 will be charged.
  • If a student is deemed not yet competent on completion of training, they will be offered an opportunity to be reassessed. If a student is deemed not yet competent a second time, they will be given another opportunity for reassessment upon request.
  • If a student is required to be reassessed, they will be provided with further guidance from their trainer prior to reassessment. In most cases there will be no reassessment fee. If a reassessment fee is applicable, this fee will be included on the Instrumentation course flyer. If a student is deemed competent in some but not all the units of competencies required, a Statement of Attainment will be issued and the student will be given a six-month period to undertake reassessment if required.
  • The Student will not be entitled to be issued with a qualification until he has paid the Instrumentation course fee in full and will not be entitled to be issued with a statement of attainment for a module unit until he has paid all fees in respect of that module. The student will remain liable for unpaid instalments even if he has finished the Instrumentation course early.
  • If the student fails to pay the fees we reserve the right to notify the relevant credit agency about the default.

Instrumentation course Fees paid in Advance

The RTO requires a minimum deposit, which will not exceed $1500 per individual student, prior to Instrumentation course commencement. If the full course fees are below $1500, the full fees may be required to be paid prior to course commencement. Following Instrumentation course commencement, full fees will be required to be paid by either a payment plan (if remaining fees are over $1500), or in full (if the remaining fees are below $1500) for tuition and other services yet to be delivered.

Complaints and Appeals

If a student, trainer or staff member is experiencing any difficulties, they are encouraged to discuss their concerns with Senior Management. The RTO administrative staff will make themselves available at a mutually convenient time if a student wishes to seek assistance. If a Staff member or Student wishes to make a formal complaint they are required to complete a Complaints and Appeals Form, which is included in the Student Handbook. Once the form has been completed, the form should be submitted to the RTO for taking action. Please refer to the Student Handbook for more details on the complaints and appeals process.

Support Services

The RTO caters to diverse client learning needs and aims to identify and respond to the learning needs of all clients. Clients are encouraged to express their views about their learning needs at all stages of their learning experience from the initial enrolment and induction stage. The RTO will analyse who the target candidates are and whether an individual, a specific group or a broad target group and will determine the key characteristics and needs of candidates.

The RTO is committed to providing clients requiring additional support, advice or assistance while training. To achieve this and to ensure the quality delivery of training and education, The RTO provides client vocational counselling to improve and extend training outcomes. Students are advised to make an appointment with their trainer in the first instance, if required the student can then schedule an appointment with the RTO for further counselling.

RTO’s Training Obligation and Guarantee

Ausinet is committed to provide quality training to all the students. We have best trainer from the industry with Instrumentation qualification and expertise to deliver the Instrumentation course. On successful completion of the course you will receive nationally recognised Instrumentation certificate which meets the AQF i.e. UEE40411 Certificate IV in Electrical-Instrumentation. We deliver training assessment and support services that meet student’s needs, in accordance with student’s rights and obligations. We provide students with timely access to current and accurate records of their participation and progress.

On completion of the Instrumentation course the RTO is responsible for issuance of AQF certification document i.e. UEE40411 Certificate IV in Electrical-Instrumentation

The RTO will guarantee to complete all training and/ or assessment once the student has commenced study in their chosen qualification or course of study, unless the student submits a formal Letter of Withdrawal notifying the RTO that they wish to withdraw.

Contact Details/Trainer Details

Kevin is one of our best trainers and is available on 0468 836 679 during business hours for any Instrumentation training or course related inquiry.

Delivery Location

Unit 104, 5 Mccourt Road, Yarrawonga, NT – 0830

 

 

Delivery Location

Unit 104, 5 Mccourt Road, Yarrawonga, NT - 0830