The course delivers 15 units
|UEENEEC024B||Participate in instrumentation and control work and competency development activities|
|UEENEEE119A||Solve problems in multiple path extra low voltage (ELV) a.c. circuits|
|UEENEEI106A||Set up and adjust PID control loops|
|UEENEEI107A||Install instrumentation and control cabling and tubing|
|UEENEEI108A||Install instrumentation and control apparatus and associated equipment|
|UEENEEI110A||Set up and adjust advanced PID process control loops|
|UEENEEI111A||Find and rectify faults in process final control elements|
|UEENEEI112A||Verify compliance and functionality of instrumentation and control installations|
|UEENEEI113A||Setup and configure human-machine interface (HMI) and industrial networks|
|UEENEEI150A||Develop, enter and verify discrete control programs for programmable controllers|
|UEENEEK142A||Apply environmentally and sustainable procedures in the energy sector|
|UEENEEP013A||Disconnect – reconnect control devices connected to low voltage installation wiring|
|UEENEED104A||Use engineering applications software on personal computers|
|UEENEEI114A||Trouble shoot process control systems|
|UEENEEI117A||Calibrate, adjust and test measuring instruments|
UEENEEE101A* – Apply Occupational Health and Safety regulations, codes and practices in the workplace (CT)
UEENEEE102A* – Fabricate, assemble and dismantle utilities industry components (CT)
UEENEEE104A* – Solve problems in d.c. circuits (CT)
UEENEEE105A* – Fix and secure electro technology equipment (CT)
UEENEEE107A* – Use drawings, diagrams, schedules, standards, codes and specifications (CT)
UEENEEE137A* – Document and apply measures to control OHS risks associated with electro technology work (CT)
UEENEEI101A# – Use instrumentation drawings, specification, standards and equipment manuals (CT or TBD)
UEENEEI102A# – Solve problems in pressure measurement components and systems (CT or TBD)
UEENEEI103A# – Solve problems in density/level measurement components and systems (CT or TBD)
UEENEEI104A# – Solve problems in flow measurement components and systems (CT or TBD)
UEENEEI105A# – Solve problems in temperature measurement components and systems (CT or TBD)
Instrumentation job roles associated with this qualification relate to instrumentation, manufacturing and process control. Possible instrumentation job titles and roles relevant to this qualification include:
Clients enrolling in this instrumentation course are typically those electricians who desire to upskill and learn more about instrumentation which is a natural progression to the electrical trade.
UEE40411 Certificate IV in Electrical – Students have a maximum of 1 year to complete this instrumentation course from the date of enrollment. The assessments must be completed in class under the supervision of the trainer. The instrumentation course has an RPL component and fieldwork component which depends on the student’s experience and exposure to the type of work related to the competency. Regardless of the amount of instrumentation experience students must complete a challenge test to be granted an instrumentation RPL for that particular unit. Proof of experience should be provided and will be reference checked by the Trainer. Refer to the customised instrumentation RPL kit provided by your trainer for further information. Further extension may be granted by the trainer on request. Some students may require longer timeframes if they do not have experience or exposure to instrumentation work. Students are welcome to sit in the forthcoming classes at no additional fees to seek further assistance from the trainer to finish the remainder of Practical Assessment and instrumentation course work. For the schedule of forthcoming classes speak to the trainer.
The units are delivered via face to face delivery mode. The core units and the elective units are arranged in topics and are completed throughout the online and face to face delivery and via the learner’s self-paced completion of project assessment work.
The instrumentation course is organized into the following themes
Each student’s achievement of each unit of competency within the qualification is assessed by their completion of written, practical tests, assignments and the observation of the competency in practical projects, in varying contexts on a number of occasions.
RPL Fees – $495/unit (non-refundable). The competencies in this qualification may be attained through the process of Recognition of Prior Learning (RPL). RPL takes into consideration the candidates’ previous instrumentation training, work, and life experience. AUSINET trainer/assessor will provide candidates with an RPL Application form at enrolment, to assist the candidate in determining if RPL is an appropriate pathway to gain the qualification. If appropriate, candidates will be provided with an RPL Self-Assessment Guide and instructions on how to prepare a portfolio of evidence. The RPL documentation is available on request.
RPL also includes an open book challenge test which has to be completed at Ausinet premises under the supervision of a trainer. A booking with Ausinet admin is essential to organise this test.
Cert IV Instrumentation Brisbane,Cert III in Instrumentation and Control Darwin,Instrumentation and Controls Training Brisbane,Electrical Instrumentation Course Darwin ,Instrumentation Course Darwin ,Instrumentation Course Brisbane ,Instrumentation Courses Darwin ,Instrumentation Training Brisbane,Instrumentation Apprenticeship Darwin,Instrumentation Training Courses Brisbane,Instrument Technician Training Darwin,Instrumentation Courses Online Brisbane,Hazardous Area Course,Hazardous Area Refresher,Cert IV Hazardous Area,Hazardous Area Course Darwin,Hazardous Area Refresher Darwin,Cert IV Hazardous Area Darwin are some our programs at Ausinet.
The RTO requires a minimum deposit, which will not exceed $1500 per individual student, prior to course commencement. If the full course fees are below $1500, the full fees may be required to be paid prior to course commencement. Following course commencement, full fees will be required to be paid by either a payment plan (if remaining fees are over $1500), or in full (if the remaining fees are below $1500) for tuition and other services yet to be delivered.
If a student, trainer or staff member is experiencing any difficulties, they are encouraged to discuss their concerns with Senior Management. The RTO administrative staff will make themselves available at a mutually convenient time if a student wishes to seek assistance. If a Staff member or Student wishes to make a formal complaint they are required to complete a Complaints and Appeals Form, which is included in the Student Handbook. Once the form has been completed, the form should be submitted to the RTO for taking action. Please refer to the Student Handbook for more details on the complaints and appeals process.
Ausinet is committed to providing quality instrumentation training to all the students. We have the best trainer from the industry with qualification and expertise to deliver the instrumentation course. On successful completion of the course, you will receive the nationally recognised instrumentation certificate. We deliver instrumentation training assessment and support services that meet student’s needs, in accordance with student’s rights and obligations. We provide students with timely access to current and accurate records of their participation and progress.
On completion of the instrumentation course, the RTO is responsible for the issuance of AQF certification document.
The RTO will guarantee to complete all instrumentation training and/ or assessment once the student has commenced study in their chosen qualification or course of study unless the student submits a formal Letter of withdrawal notifying the RTO that they wish to withdraw.
Kevin is one of our best trainers and is available on 0468 836 679 during business hours for any course related inquiry.
3 Westlink Court, Westlink Green, Darra, QLD - 4076