Skip to content
Cert 4 HA

Certificate IV Hazardous Areas Electrical DARWIN

UEE42622 – Certificate IV Hazardous Areas Electrical – DARWIN

Gap Training For Electricians

Gap Training For Electricians

We can give you RPL for qualifications you have already attained – please see below :

If you have an EEHA Certificate  (if you have done your EEHA course less than 2 years ago and only need these 4 units: UEECD0027 (UEENEEE038B), UEECD0024 (UEENEEE117A), UEECD0010 (UEENEEE124A) and UEERE0015 (UEENEEK145A):

If you have a Certificate IV in Instrumentation (if you have done your Certificate IV in Instrumentation course and have already attained these 4 units: UEECD0027 (UEENEEE038B), UEECD0024 (UEENEEE117A), UEECD0010 (UEENEEE124A) and UEERE0015 (UEENEEK145A):

Certificate IV in Hazardous Areas only: If you have completed Certificate IV in Instrumentation and EEHA and if you wish to obtain Certificate IV in Hazardous Areas, please pay the fee and provide your certificates and statements of attainment. Please note your EEHA certificate must have been completed in the past 2 years.

ABOUT THE COURSE

WHO SHOULD TAKE THIS COURSE

Installation and Maintenance of Electrical Equipment in Hazardous Areas – Refresher Certificate IV Hazardous Area Electrical UEE42622 is a natural progression for Electricians wanting to upskill and work in the Oil and Gas Manufacturing Industry.

COURSE OVERVIEW

Certificate IV Hazardous Areas Electrical is a 5-day intensive course that consists of 4–days of theory and 1–day of practical. During this training, you will be using the latest standards and gaining hands-on practical knowledge from our trainers with over 20 years of experience.

Theory Assessments:

You will cover knowledge from AS 60079 series for various explosion techniques like Ex d, Ext, Ex e, Exp, Ex m and Ex I in Gaseous and Dust atmospheres. At the end of the theory assessments, you will have sound knowledge of the Hazardous area classifications, purpose, installation, maintenance aspects of the equipment and explosion techniques.

Practical Assessment:

Practical should be pre-booked with our support team (support@ausinet.com.au) which can be done after completing your theory assessments. A full-day intensive practical comprises the following tasks:

  • Installation of barrier glands based on the type of cables, selecting appropriate glands for given cables.
  • Inspecting different equipment in a HA site located in the workshop.
  • Planning and preparing HA documents.
  • Installing HA equipment in HA environment in the workshop
  • Documenting/Creating a HAVD.

On completion of this EEHA Course, you will receive a Nationally recognized qualification.

This qualification provides competencies to:

  • Supervise selection, installation, commissioning and testing of explosion-protected equipment and systems for control and monitoring of plant and processes.
  • Work with explosion protection techniques with elections in how they apply to gas and dust atmospheres.
  • Select, plan, Install, test, fault find, repair, and maintain equipment located in Hazardous areas.

Refer to the “Study Pathways” listed on the home page of the Ausinet website for future study pathways.

FUNDING

There is funding available for this course. Please contact us for more details. 

DURATION

5 Days*

INTAKE DATES

Option 1: In-class Training – Email or call to check availability.
Option 2: Hybrid Training – Ongoing, enrol and start any time.

DELIVERY OF COMPETENCIES

Option 1: In-class Training – Theory with practicals (self-paced).
Option 2: Hybrid Training – Self-paced theory to be completed online and practical to be completed in class.
Email or call to check availability.
Throughout the course, you will have access to your trainer via phone or email during normal business hours.
The ‘chat with trainer’ function is available from 9 a.m. to 9 p.m.

HOW TO ENROL

Click on the book now button and follow the prompts

ENTRY REQUIREMENTS

In order to enrol in Certificate IV in Hazardous Area – Electrical you must have:

  • Computer Literacy
  • Access to personal laptop/desktop with a webcam (Company laptops with firewalls may not work)
  • Reliable internet connection
  • Headset for video conferencing and video lectures (Headset = Mic + Speakers)
  • You will need a Gmail account to gain access to Google Drive to participate in this course
  • A Valid Photo ID (e.g. Drivers licence)
  • Australian Passport /Birth Certificate / Medicare Card
  • Protective footwear with safety toe cap and non-slip soles to AS2210
  • 100% cotton drill industry-standard clothing required for all practicals
  • Personal Protective Equipment (PPE) such as used gloves and safety glasses can be borrowed
  • Students must demonstrate an appropriate level of language, literacy and numeracy skills and knowledge to undertake a course at this level.
  • A Valid Unrestricted Australian Electrical licence.
  • One must be physically fit to enrol into this course as it involves the use of tools, ladders, step ladders, use of harness and maneuvering through tight spaces and working outdoors.
BOOKS/RESOURCES REQUIRED

A soft copy of the learner resource book or lecture notes is free, and we will provide it as a Google Drive link only and not as a PDF.
If you require a hard copy, a printing charge of $150 for each copy and a $100 binding charge per copy will be collected from the student.
Australian standards cannot be printed due to copyright restrictions but are available for borrowing for the duration of the course with a refundable deposit of $250 per copy. Soft copies are free to use on Ausinet laptops while in class.

You must have access to the below resources to enrol into the course or you can borrow them by paying a deposit:
AS/NZS 3008:2017
AS/NZS 3000:2018

OTHER REQUIREMENTS

You will need to bring :

  • A wired headset or headphones
  • A laptop
  • A pen and notepad

You will also need to have an email address and a reliable internet connection in order to use our online LMS platform if you are doing some parts of the course online.

Enclosed footwear must be worn at all times when you are on the premises.

COURSE OUTCOME

You will receive a Nationally Recognised Certificate upon successful course completion.

UNITS + NOMINAL HOURS

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

  • All the Core competency standard units, defined in the Core Competency Standard Units table below and
  • A combination of Elective competency standard units to achieve a total weighting of 240 points in accordance with the Elective Competency Standard Units table below.
CodeUnit of CompetencyPoints
CoreUEEHA0004Enter a classified hazardous area to undertake work related to electrical equipment40
CoreUEEHA0022Determine the explosion-protection requirements to meet a specified classified hazardous area40
CoreUEECD0010Compile and produce an energy sector detailed report60
CoreUEECD0024Implement and monitor energy sector WHS policies and procedures20
CoreUEECD0027Participate in development and follow a personal competency development plan20
CoreUEERE0015Implement and monitor energy sector environmental and sustainable policies and procedures20
ElectiveUEEHA0020Conduct detailed inspection of electrical installations for hazardous areas40
ElectiveUEEHA0025Install explosion-protected equipment and associated apparatus and wiring systems60
ElectiveUEEHA0026Maintain equipment associated with hazardous areas60
ElectiveUEEHA0029Plan electrical installations for hazardous areas20
ElectiveUEEHA0038Conduct visual and close inspection of electrical installations for hazardous areas40
ElectiveUEECO0002Maintain documentation20
CREDIT TRANSFER

Ausinet, as a Registered Training Organisation (RTO), recognises the Australian Qualifications Framework qualifications and Statements of Attainment issued by any other Australian RTO. You are encouraged to submit requests for credit from previous studies when enrolling to ensure that you are not enrolling in units you may not need to undertake. If you have completed units at other RTO and you think they may count towards the award requirements of the course you are enrolled in at Ausinet, submit an official copy of your results for the units you have undertaken. Credit transfer may fast-track your course.

RPL

Recognition of prior learning also referred to as RPL, is the formal acknowledgement of a person’s current skills and knowledge experience gained throughout life – regardless of how they have been acquired.

This is an important assessment pathway, particularly for working people who are considering doing a course. The recognition gained may considerably reduce the study time needed to get a qualification.

The RPL assessment may include workplace observation, interviews and professional conversations, work samples and documented evidence.

STUDY PATHWAYS

Further training pathways from this qualification include but are not limited to Certificate IV in Hazardous Areas Electrical

JOB OPPORTUNITIES

Job roles associated with Certificate IV Hazardous Area relate to instrumentation, manufacturing and process control. Possible job titles and roles relevant to this qualification include:

  • Instrument Fitter
  • Instrument Technician
  • Plant Instrument Technician
  • E&I Technician
  • I&E Technician
  • Instrument Technician
  • Plant Operator
  • Process Technician
  • Maintenance Technician
TESTIMONIALS

⭐⭐⭐⭐⭐

” I have just recently completed my cert IV EEHA training with Kevin and Ausinet and found the entire experience was a positive one. The teaching methods and course flexibility meant i was able to obtain my certification without having to take any time off work and still get through the theory at my own pace. The pricing of the course was extremely good and i later found that the course is supported through the trade union jetco fund which was an added bonus. I will be using Ausinet in the future for additional training for sure.”

Vinny S.

⭐⭐⭐⭐⭐

” A bit like the HA courses that have rapidly became common place in the gas industry today so to is the need & focus now to up skill within the instrumentation field. This is where Kevin excels and sits apart from other training providers, with his informative, patient and thorough knowledge that comes from his years of experience in the field and a course structure that comes from listening to what people want from their training provider, i am happy to recommend Ausinet and Kevin for both the training i have undertaken and working alongside him in the field, great effort”

Alan H.

* This competency-based training duration is subjective and varies with an individual’s experience, intellect and tenacity.

**Funding Available through your employer – Gap Fee $1500 – contact us for more details

FAQ

I am an Electrical Engineer can I do Cert IV in Hazardous Areas?

 You can receive a statement of attendance for EEHA. It is the same course but due to legal restrictions, you cannot get Cert IV as the course has a prerequisite of an electrical license.  Because you do not have an electrical license you cannot get Cert IV.

What is the difference between EEHA and Certificate IV in Hazardous Areas?

You can check this article on our blog https://www.ausinet.com.au/what-is-the-difference-between-eeha-and-certificate-iv-hazardous-areas/  Some Human Resources departments are fine with an EEHA certificate (Electrical Equipment in Hazardous Areas) only but some ask for a full Certificate. It is always better to get a full Certificate IV in Hazardous Areas as it is a higher qualification and only takes one more day to complete compared to the EEHA course. EEHA is a skill set that is part of Certificate IV in Hazardous Areas. Having Certificate IV will also enable you to work in Supervisory positions.

Recruiters might favour applicants with a Cert IV HA compared to EEHA. If they get several similar profiles, this would be what sets them out from the others and give them more chances to get the job compared to someone who just has an EEHA Certificate.