Skip to content
Electrical Test And Tag Course BRISBANE

Electrical Test And Tag Course DARWIN

UEESS00174 – Electrical Safety Testing Of Electrical Cord Connected Equipment And Cord Assemblies Skill Set – DARWIN

Supersedes and is equivalent to UEESS00098 – Restricted – Electrical safety testing of electrical cord connected equipment and cord assemblies

IMPORTANT INFORMATION

As per the NT Worksafe regulations, completing this course will allow you to test and tag equipment at your workplace. If you plan to open your own Test and Tagging business in Northern Territory, you will need to get a Restricted Electrical Contractors Licence as well. 

ABOUT THE COURSE

WHAT IS TEST AND TAG

Test and Tag is used to check the safety of electrical appliances. This is a safety requirement and testing and tagging equipment should be conducted on a regular basis. 

WHO SHOULD TAKE THIS COURSE

This Test and Tag Training Course is the perfect short course that will give you the opportunity to work with the portable apparatus tester, utilising test results to establish the safety status, identifying safe and unsafe cords and apparatus, applying appropriate tagging, documenting testing activities and handling unplanned events.

COURSE OVERVIEW

This Test and Tag Training Course gives you real experience of testing & tagging. In this course you will get real experience in the workshop testing & tagging equipment which actually you are going to test more often.

The Test and Tag Training Course meets the requirements of both the Australian Standards and the WHS Regulations Code of Practice ‘Managing Electrical Risks in the Workplace’ which states inspection and testing of electrical equipment should only be carried out by a competent person who has the relevant knowledge, skills and test instruments to carry out the relevant inspection and testing. You will get a Nationally recognised Certificate on completion of your course.

Future pathways include the Test and Tag Three Phase course.

FUNDING

CSQ funding is currently available for this course.

CSQ Funding Details

CSQ FundingDifference payable
General Category / Non-ApprenticeApprentice Advance LoadingGeneral Category / Non-ApprenticeApprentice Advance Loading
$543$653$110$0

Click here to fill out the CSQ Eligibility Form

CSQ Eligibility

CSQ Apprentice Advance Loading Eligibility

CSQ-funded training

  • Construction Skills Queensland is an independent, not-for-profit, industry funded body supporting employers, workers, apprentices, trainees and career seekers in the building and construction industry.
  • CSQ provides funding to reduce the financial obstacle to training, making upskilling an affordable option for many more individuals in the construction industry.
  • CSQ-funded training is delivered by a range of selected registered training organisations (RTOs) across Queensland.
  • CSQ contributes towards the cost of courses to reduce the cost to participants. CSQ funding is paid directly to the contracted RTO, generally between 75% and 100% of course costs.

Apprentice Advance

  • CSQ’s Apprentice Advance loading gives Queensland’s construction apprentices and trainees a valuable edge in the jobs market with free additional training to boost their skills and career prospects.
  • Through the program, CSQ fully covers the training costs of priority short courses and higher-level skills training for construction apprentices and trainees.
  • The Apprentice Advance loading is available to any Queenslander currently in an eligible construction apprenticeship or traineeship, or for the first year following completion of an eligible apprenticeship/traineeship.
  • CSQ is committed to helping apprentices’ future-proof their careers by keeping their skills up to date with the latest training.
DURATION

1 Day*

INTAKE DATES

Ongoing, enrol and start any time.

DELIVERY OF COMPETENCIES

Blended Training: Theory to be completed online and practical to be completed in class.

HOW TO ENROL

Click on the book now button and follow the prompts

ENTRY REQUIREMENTS

You must have a Valid ID eg. Drivers Licence to enrol in this course

Entry requirements for this qualification are :

  • A moderate level of language, literacy and numeracy
  • If you can read and write emails, use a calculator, operate a mobile phone, navigate our website and complete an enrolment form you are eligible to do this course
  • Basic Computer Literacy

If you think you have learning disabilities please contact support@ausinet.com.au and we will provide an LLN test and assess your eligibility for the course. 

BOOKS REQUIRED

OTHER REQUIREMENTS

You will need to bring :

  • A wired headset or headphones
  • A laptop
  • A pen and notepad

You will also need to have an email address and a reliable internet connection in order to use our online LMS platform if you are doing some parts of the course online.

Enclosed footwear must be worn at all times when you are on the premises.

COURSE OUTCOME

Upon successful completion of this course you will receive a Nationally Recognised Statement of Attainment. This will enable you to Test and Tag equipment within your company. 

Course Outcome:

  • Apply Occupational Health and Safety
  •  Conduct in-service safety testing of electrical cord
  •  Interpret the test results of any equipment they use
  • Understand legislation, Australian Standard AS/NZS 3760 and Codes of Practice relevant to
    ‘Managing Electrical Risks in the Workplace’
UNITS + NOMINAL HOURS
CodeUnit of CompetencyPoints (Hours)
UEECD0007Apply work health and safety regulations, codes and practices in the workplace20
UEERL0003Conduct in-service safety testing of electrical cord connected equipment and cord assemblies20

UEECD0007 supersedes and is equivalent to UEENEEE101A

UEERL0003 supersedes and is equivalent to UEENEEP026A

CREDIT TRANSFER

Ausinet, as a Registered Training Organisation (RTO), recognises the Australian Qualifications Framework qualifications and Statements of Attainment issued by any other Australian RTO. You are encouraged to submit requests for credit from previous studies when enrolling to ensure that you are not enrolling in units you may not need to undertake. If you have completed units at other RTO and you think they may count towards the award requirements of the course you are enrolled in at Ausinet, submit an official copy of your results for the units you have undertaken. Credit transfer may fast-track your course.

RPL

Recognition of prior learning, also referred to as RPL, is the formal acknowledgement of a person’s current skills and knowledge experience gained throughout life – regardless of how they have been acquired.

This is an important assessment pathway, particularly for people who are considering doing study. The recognition gained may considerably reduce the study time needed to get a qualification.

The RPL assessment may include workplace observation, interviews and professional conversations, work samples and documented evidence. Please contact the office for an RPL kit.

STUDY PATHWAYS

Further training pathways from this qualification include but are not limited to Plug Top Replacement

JOB OPPORTUNITIES
  • Appliance test and Tag Technician
TESTIMONIALS

⭐⭐⭐⭐⭐

” Great knowledge from the trainer Kev. Highly recommend”

CRAIG A.

⭐⭐⭐⭐⭐

“Content was good, making use of video presentations and plenty of opportunity to practice. The flexible training hours really suited me, too. Thanks Kevin!”

WILLEM W.

⭐⭐⭐⭐⭐

“The course was very well set up to accommodate my roster. Kevin was brilliant, he guided me through all aspects of the course making sure I understood both the practical and theory. One of the best courses I have completed, very enjoyable.”

DAMIEN L.

* This is a competency-based training duration is subjective and varies with an individual’s experience, intellect and tenacity.

FAQ

What are test and tag regulations in QLD and how do they work?
  • Test and Tag for personal appliances or at your workplaceIn QLD if you want to do testing and tagging for your personal electrical equipment, you have to follow the following steps:
    • Successfully complete a Nationally Recognized Test and Tag course from any institute in QLD
    • Follow and work with AS/NZS 3012 or 3760 standards
    • Make sure you follow the WorkSafe Queensland guidelines and rules
    • Don’t hesitate to do a Test and Tag refresher course if you need to refresh your knowledgeTest and Tag as a service to clients other than the organisation you are employed atIf you are seeking to provide the test and tag services in Queensland as a service you will need to follow the below steps :
    • Apply for a Restricted Electrical Contractor licence with the QLD Electrical Safety Department
    • Successfully complete a Nationally Recognized Test and Tag course from any institute in QLD
    • Follow and work with AS/NZS 3012 or 3760 standards
    • Make sure you follow the WorkSafe Queensland guidelines and rulesDon’t hesitate to do a Test and Tag refresher course if you need to refresh your knowledge
Work Safe QLD Rules for Test and Tagging
Can I do the Test and Tag course if I am an International Student?

Our Test and Tag course is not a CRICOS registered course so you would not be able to enrol and get a certificate. However you could do the course for your own knowledge but keep in mind you would not get a certificate and you would not be able to Test and Tag. You can wait until you get another visa type that has no restrictions on study.

Does my Test and Tag licence expire?

No it doesn’t expire 

Do you offer an online Test and Tag course?

Yes but only for people who own or have access to one of the following PAT testers : Metrel 3309 and/or Seaward 125EL.

How long is the theory component?

We recommend allowing 2 full days online from home to complete the theory component, but some people have completed it in as low as 3 hours. The practicals is 1 full day at our facilities

How long is the theory component to complete at home?

We recommend allowing 2 full days online from home to complete the theory component