UEE33020 – Certificate III in Electrical Fitting BRISBANE

This qualification provides competencies to manufacture, fit, assemble, erect, operate, test, fault find, alter and repair electrical equipment and includes electrical wiring work only if that work is associated with assembling, maintaining, terminating or altering the wiring between electrical components within a plant or machinery. An electrical fitter is not authorised to install any electrical wiring systems within an electrical installation as prescribed by definitions contained in AS/NZS 3000 Electrical installations (known as the Australian/New Zealand Wiring Rules).

Electrical equipment means any appliance, article, accessory, wire, fitting, cable, conduit or apparatus that generates, uses, conveys or controls (or that is intended to generate, use, convey or control) electricity above extra-low voltage (ELV).

The skills and knowledge described in this qualification may require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).

Competency development activities in this qualification may be subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training through an Australian Apprenticeship may be required.

Licensing, legislative and regulatory requirements that apply to this qualification can vary between states and territories. Some jurisdictions require that the qualification is completed as an apprenticeship to obtain an Electrical Occupational License. Relevant information must be sourced prior to commencing the qualification. Where required for Licencing, the certification documentation issued must indicate if the qualification was completed as an apprenticeship or Trades Recognition Australia (TRA) pathway.

There is funding available for this course.

4 Years*

Ongoing, enrol and start anytime.

Theory to be completed online and practical to be completed in class.

Contact Us

This course is only available to individuals enrolled in an Electrical Apprenticeship

• Computer Literacy.
• Access to personal laptop/desktop with a webcam (Company laptops with firewalls may not work).
• Reliable internet connection.
• Headset for video conferencing and video lectures (Headset = Mic + Speakers).
• You will need a Gmail account to gain access to Google Drive to participate in this course.
• A Valid Photo ID (e.g. Driver’s licence).
• Australian Passport /Birth Certificate / Medicare Card.
• Protective footwear with safety toe cap and non-slip soles to AS2210.
• 100% cotton drill industry-standard clothing required for all practicals.
• Personal Protective Equipment (PPE), such as used gloves and safety glasses, can be borrowed.
• Students must demonstrate appropriate language, literacy and numeracy skills and knowledge to undertake a course at this level.
• One must be physically fit to enrol into this course as it involves the use of tools, ladders, step ladders, use of harnesses and manoeuvring through tight spaces and working outdoors.
• Education – Successful completion of Year 9 or 10 or its equivalent.

All essential books are provided by Ausinet for this course.

You will need to bring :

• A wired headset or headphones
• A notepad
• A pen

You will also need to have an email address, a laptop and a reliable internet connection in order to complete the online theory part of the course. Enclosed footwear must be worn at all times when you are on the premises.

You will receive a Nationally Recognised Certificate for Certificate III in Electrical Fitting

Ausinet, as a Registered Training Organisation (RTO), recognises the Australian Qualifications Framework qualifications and Statements of Attainment issued by any other Australian RTO. You are encouraged to submit requests for credit from previous studies when enrolling to ensure that you are not enrolling in units you may not need to undertake. If you have completed units at other RTO and you think they may count towards the award requirements of the course you are enrolled in at Ausinet, submit an official copy of your results for the units you have undertaken. Credit transfer may fast-track your course.

Recognition of prior learning also referred to as RPL, is the formal acknowledgment of a person’s current skills and knowledge experience gained throughout life – regardless of how they have been acquired.

This is an important assessment pathway, particularly for working people who are considering doing a course. The recognition gained may considerably reduce the study time needed to get a qualification.

RPL is not available for Certificate III in Electrical Fitting

Further training pathways from this qualification include but are not limited to Certificate III in Electrotechnology Electrician and Certificate IV In Electrotechnology Systems Electrician.

• Electrician

⭐⭐⭐⭐⭐

“They easily explained things to me and talked about real things like how electrical stuff works and the trainers were very easygoing no matter how many times you ask them to explain something and are near or more than perfect.”

TREVOR S.

⭐⭐⭐⭐⭐

“The location, the trainers and the admin team were all great”

JEISON T.S.

⭐⭐⭐⭐⭐

“The course is self-paced and accessible to someone who is working full-time!!!”

ERIC S.

Read more reviews ⭐⭐⭐⭐⭐

AUSINET is a specialised Registered Training Organisation (RTO 41457) focusing exclusively on Electrotechnology. Students and industry professionals choose us because:

• Expert, Industry-Experienced Trainers: Our trainers are specialists with significant hands-on experience in the electrical industry, ensuring relevant and practical learning.
• Focus on Practical Skills & Current Standards: We emphasise hands-on training that aligns with current Australian industry requirements, safety protocols (AS/NZS standards), and technological advancements.
• Comprehensive Course Range: From foundational Certificate II qualification to Diplomas and targeted short courses (e.g., Test and Tag, PLC, Solar, EEHA), we cover a broad spectrum of the electrical field.
• Career Advancement: Our courses are structured to help you gain recognised qualifications, enhance your job prospects, and take the next step in your electrical career in Australia.
• Strong Reputation & Student Success: We are committed to student success and pride ourselves on the positive feedback and career outcomes our graduates achieve. We encourage you to check student testimonials on our website and explore independent review platforms to understand the AUSINET advantage.

Master the Skills of Electrical Fitting with the UEE33020 – Certificate III in Electrical Fitting at AUSINET Brisbane

The UEE33020 – Certificate III in Electrical Fitting equips you with the expertise to assemble, install, test, and maintain electrical equipment and wiring to the allowed extent. This hands-on course focuses on practical skills and safety knowledge, ensuring you are ready to work confidently in industrial and commercial settings. At AUSINET Brisbane, you’ll receive industry-relevant training that prepares you for real-world applications, making you a standout candidate for employers in the electrical field.